登录
  • 欢迎访问悠扬的技术博客,推荐使用最新版火狐浏览器和Chrome浏览器访问本网站😉

Kibana开发工具安装

kibana 悠扬 496次浏览 已收录 0个评论

版本说明

名称 版本 备注
kibana  kibana-7.7.1-linux-x86_64.tar.gz  

安装配置

tar -zxvf kibana-7.7.1-linux-x86_64.tar.gz -C /usr/local/
cd /usr/local/
mv kibana-7.7.1-linux-x86_64/ kibana-7.7.1/
#编辑配置文件,在末尾添加
vim /usr/local/kibana-7.7.1/config/kibana.yml
授权
chown -R elasticsearch. /usr/local/kibana-7.7.1/
# Kibana is served by a back end server. This setting specifies the port to use.
# 
server.port: 5601

# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
# The default is 'localhost', which usually means remote machines will not be able to connect.
# To allow connections from remote users, set this parameter to a non-loopback address.
server.host: "172.168.9.146"

# Enables you to specify a path to mount Kibana at if you are running behind a proxy.
# Use the `server.rewriteBasePath` setting to tell Kibana if it should remove the basePath
# from requests it receives, and to prevent a deprecation warning at startup.
# This setting cannot end in a slash.
#server.basePath: ""

# Specifies whether Kibana should rewrite requests that are prefixed with
# `server.basePath` or require that they are rewritten by your reverse proxy.
# This setting was effectively always `false` before Kibana 6.3 and will
# default to `true` starting in Kibana 7.0.
#server.rewriteBasePath: false

# The maximum payload size in bytes for incoming server requests.
#server.maxPayloadBytes: 1048576

# The Kibana server's name.  This is used for display purposes.
server.name: "kibana160"

# The URLs of the Elasticsearch instances to use for all your queries.
elasticsearch.hosts: ["http://172.168.9.144:9200","http://172.168.9.145:9200","http://172.168.9.146:9200"]

# When this setting's value is true Kibana uses the hostname specified in the server.host
# setting. When the value of this setting is false, Kibana uses the hostname of the host
# that connects to this Kibana instance.
#elasticsearch.preserveHost: true

# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
# dashboards. Kibana creates a new index if the index doesn't already exist.
kibana.index: ".kibana"

# The default application to load.
kibana.defaultAppId: "kibana-160"

# If your Elasticsearch is protected with basic authentication, these settings provide
# the username and password that the Kibana server uses to perform maintenance on the Kibana
# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
# is proxied through the Kibana server.
#elasticsearch.username: "kibana"
#elasticsearch.password: "pass"

# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
# These settings enable SSL for outgoing requests from the Kibana server to the browser.
#server.ssl.enabled: false
#server.ssl.certificate: /path/to/your/server.crt
#server.ssl.key: /path/to/your/server.key

# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
# These files are used to verify the identity of Kibana to Elasticsearch and are required when
# xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.
#elasticsearch.ssl.certificate: /path/to/your/client.crt
#elasticsearch.ssl.key: /path/to/your/client.key

# Optional setting that enables you to specify a path to the PEM file for the certificate
# authority for your Elasticsearch instance.
#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]

# To disregard the validity of SSL certificates, change this setting's value to 'none'.
#elasticsearch.ssl.verificationMode: full

# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
# the elasticsearch.requestTimeout setting.
elasticsearch.pingTimeout: 1500

# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
# must be a positive integer.
elasticsearch.requestTimeout: 30000

# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
# headers, set this value to [] (an empty list).
#elasticsearch.requestHeadersWhitelist: [ authorization ]

# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
#elasticsearch.customHeaders: {}

# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
#elasticsearch.shardTimeout: 30000

# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
#elasticsearch.startupTimeout: 5000

# Logs queries sent to Elasticsearch. Requires logging.verbose set to true.
#elasticsearch.logQueries: false

# Specifies the path where Kibana creates the process ID file.
#pid.file: /var/run/kibana.pid

# Enables you specify a file where Kibana stores log output.
#logging.dest: stdout

# Set the value of this setting to true to suppress all logging output.
#logging.silent: false

# Set the value of this setting to true to suppress all logging output other than error messages.
#logging.quiet: false

# Set the value of this setting to true to log all events, including system usage information
# and all requests.
#logging.verbose: false

# Set the interval in milliseconds to sample system and process performance
# metrics. Minimum is 100ms. Defaults to 5000.
#ops.interval: 5000

# Specifies locale to be used for all localizable strings, dates and number formats.
# Supported languages are the following: English - en , by default , Chinese - zh-CN .
i18n.locale: "zh-CN"


配置开机启动

/etc/init.d 下创建kibana

cd /etc/init.d/
vi kibana
chmod +x kibana 
chkconfig --add kiban
#!/bin/bash

# chkconfig:   2345 98  02
# description:  kibana

KIBANA_HOME=/usr/local/kibana-7.7.1/
case $1 in
        start)
          su elasticsearch<<!
          $KIBANA_HOME/bin/kibana &
          exit
!
          echo "require start";;
        *)
esac
参考修改
#!/bin/bash
#chkconfig: 345 63 37
#description: kibana
#processname:kibana-7.6.2

export ES_HOME=/usr/local/kibana-7.6.2-linux-x86_64

case $1 in
        start)
                su kibana<<!     [注意:kibana 是我创建的用户,改成你的]
                cd $ES_HOME
                ./bin/kibana -p pid &
                exit
!
                echo "kibana is started"
                ;;
        stop)
                pid=`cat $ES_HOME/pid`
                kill -9 $pid
                echo "kibana is stopped"
                ;;
        restart)
                pid=`cat $ES_HOME/pid`
                kill -9 $pid
                echo "kibana is stopped"
                sleep 1
                su kibana<<!       [注意:kibana 是我创建的用户,改成你的]
                cd $ES_HOME
                ./bin/kibana -p pid &
                exit
!
                echo "kibana is started"
        ;;
    *)
        echo "start|stop|restart"
        ;;
esac
exit 0
启动服务
service kibana start

http://172.168.9.146:5601/app/kibana


版权所有丨如未注明 , 均为原创丨本网站采用BY-NC-SA协议进行授权 , 转载请注明Kibana开发工具安装
喜欢 (0)
支付宝[]
分享 (0)
悠扬
关于作者:
10年以上工作经验,从事2年微服务架构搭建工作,有大数据处理相关工作经验,使用spring全家桶包括:Spring,SpringBoot,SpringCloud 数据层组件服务使用SpringDataJpa,Mybatis以及其他第三方组件Sharding-JDBC,Sharding-Proxy分库分表。熟悉微服务,服务降级,限流,分流,做过项目源码修改,有cat,apollo,nacos使用经验,有Lostash,Elasticsearch,kibana,mysqlMHA生产实践经验,使用开源代码Apache Sarding项目,修改源码支持mysql分库分表使用年月日小时分库分表,docker做集群服务,Jekins做项目发布,GitLab做项目管理,使用docker容器部署,熟悉消息队列RabbitMQ,Kafka,ActiveMQ。RuoYi-Vue-Atomikos项目开源加入生态圈组件,项目支持分布式事务,界面添加多数据源,数据源动态配置,切面切换,多数据源事务支持,支持区域数据源配置,用于区域数据切分,数据层次分库。项目地址:https://gitee.com/zsiyang/ruoyi-vue-atomikos
发表我的评论
取消评论

表情 贴图 加粗 删除线 居中 斜体 签到

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址